- DIY & Robot Parts
- >
- Lever Servo
Lever Servo
This is an HDD (heavy duty digital) 19 kg/cm servo with a EZ-Clip lever that rotates 180 degrees. The metal internals can withstand a high load. Dream up new robot functionality, and then build it. It's that simple! EZ-Clip servos are robot building blocks. Increase your robot's capabilities by adding more components and joints.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
-
PRODUCT OVERVIEW
-
CONTENTS AND DIMENSIONS
-
RELATED PRODUCTS
-
TECHNICAL SPECS
- 1 x HDD Servo
- 1 x Lever Servo L-Bracket
- 1 x Lever Servo U-Bracket
Lever Servo L-Bracket
Replacement plastic L-Bracket for your Lever Servo.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
Lever Servo U-Bracket
Replacement plastic U-Bracket for your Lever Servo.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
Heavy Duty Servo (Digital)
This is a heavy duty digital servo which can lift 19 kg/cm! The metal internal gears can withstand a high load. Designed for the EZ-B v4, this servo is happy to accept 7.4v LiPo battery power.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
Heavy Duty Digital Servo Motors
Inside the HDD servo motors are full metal gears and real ball bearings that lift 19 kg/cm! These servos will withstand a high load and have enough strength to let your robots walk, move or lift. We've engineered these servo motors to be tough from years of R&D. Check out our demonstration video! |
HEAVY DUTY DIGITAL SERVO MOTORS
Features
- Operating speed: 0.22±0.01 sec/60° (7.4v)
- Running current: 1400±30mA (7.4v)
- Stall torque: 19±0.20kg·cm (7.4v)
- Stall current: 3000±50mA (7.4v)
- Running life: > 180,000 Turns
- Temperature range: -10C to +50C
- Operating voltage: 4.8V to 8.4v
- Dual ball metal bearing
- All metal gears
- Connector wire length: 32cm
- Futaba 3f (25 teeth) for driving spline/shaft
- 6.2mm C1 standard spline (including teeth)