- DIY & Robot Parts
- >
- Heavy Duty Servo (Digital)
Heavy Duty Servo (Digital)
This is a heavy duty digital servo which can lift 19 kg/cm! The metal internal gears can withstand a high load. Designed for the EZ-B v4, this servo is happy to accept 7.4v LiPo battery power.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
-
PRODUCT OVERVIEW
-
CONTENTS AND DIMENSIONS
-
RELATED PRODUCTS
This servo powers our Revolution robots, such as humanoid JD, and hexapod Six.
Includes
|
Product Dimensions
Width: 4.5 cm Length: 3.5 cm Height: 2.0 cm Weight: 0.0700 kg Shipping Dimensions Width: 10.0 cm Length: 12.0 cm Height: 10.0 cm Weight: 0.1700 kg |
Lever Servo
This is an HDD (heavy duty digital) 19 kg/cm servo with a EZ-Clip lever that rotates 180 degrees. The metal internals can withstand a high load. Dream up new robot functionality, and then build it. It's that simple! EZ-Clip servos are robot building blocks. Increase your robot's capabilities by adding more components and joints.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
Rotation Servo
This is a HDD (Heavy duty digital) 19 kg/cm servo with an EZ-Bit connection that rotates 180 degrees. The metal internals can withstand a high load. Up to three EZ-Bit accessories can be added to this component. It comes with a servo and mounts directly to any EZ-Bit connector.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
Micro HDD Servo
This is a very strong and small metal geared heavy duty digital (HDD) servo. It has impressive strength and small size. Perfect for small robots or tight areas which require a strong small servo.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
HEAVY DUTY DIGITAL SERVO MOTORS
Features
- Operating speed: 0.22±0.01 sec/60° (7.4v)
- Running current: 1400±30mA (7.4v)
- Stall torque: 19±0.20kg·cm (7.4v)
- Stall current: 3000±50mA (7.4v)
- Running life: > 180,000 Turns
- Temperature range: -10C to +50C
- Operating voltage: 4.8V to 8.4v
- Dual ball metal bearing
- All metal gears
- Connector wire length: 32cm
- Futaba 3f (25 teeth) for driving spline/shaft
- 6.2mm C1 standard spline (including teeth)