7.4V LiPo USB Battery Charger
This charger will allow you to use a common USB power adapter to charge your LiPo batteries. The USB power adapter is not included. We recommend using this LiPo Charger with a USB power adapter rated for 2A for the fastest charging results.
Note: Use only with 7.4V Lithium polymer batteries
*Note: Unlike the LiPo Battery Charger, this wire does not 'top up' the battery after it has been fully charged and sitting idle for a while. It is recommended that you unplug this wire from your robot after it has completed charging. This usually takes around 90 minutes.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
- Intelligent charging management IC
- Charging protection circuit: short circuit detection and pre-check alarm functions
- Safely manages balance charging for a 2 cell (7.4V) LiPo battery
- Charging indicator LEDs (Red Solid- power on, Red Flashing - alarm, Green flashing - charging, Green solid - charging complete)
- Keyed and locking charging connector for reverse insertion protection
- 1 x 7.4V LiPo USB Battery Charger (wall plug not included)
LiPo Battery Upgrade Kit
Upgrade your Shell-E, Developer Kit, or custom robot with a LiPo Battery Upgrade Kit! It has everything you need to replace your Battery Holder 6 x AA with a rechargeable LiPo Battery.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
LiPo Battery
Lithium-ion polymer robot battery provides power to your EZ-Robot or EZ-B v4.
*Note: LiPo Batteries will be shipped in a plastic casing that looks similar to the Dodecagon Body, in order to ensure that it arrives safely. Simply remove the battery door to extract your battery.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
LiPo Battery Charger
Recommended balancer charger for our LiPo Robot Battery 7.4v 1300mAh. This balancer charger monitors the voltage of each cell in a pack and varies the charge on a per-cell basis so that all cells are brought to the same voltage, so your batteries last longer.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
- 5VDC 2A Input
- 7.4VDC 1A output
- USB-A connector input
- JST-XH 2.5mm pitch 3 position connector output