- DIY & Robot Parts
- >
- Power Base
Power Base
The Power Base is a holder for your EZ-B v4 Smart Robot Controller. It lets you use your EZ-B v4 outside of a robot body.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
-
PRODUCT OVERVIEW
-
CONTENTS AND DIMENSIONS
-
RELATED PRODUCTS
Includes
|
Product Dimensions
Width: 6.5 cm Length: 6.5 cm Height: 4.0 cm Weight: 0.1000 kg Shipping Dimensions Width: 1.0 cm Length: 12.0 cm Height: 10.0 cm Weight: 0.2000 kg |
EZ-B Smart Robot Controller and Camera Combo
The EZ-B v4 Smart Robot Controller and Camera combo start customizing your robot with EZ-Bits, or create a robot from scratch. This is the brain and vision for your EZ-Robot! With the electronics protected by a stylish plastic shell, the EZ-B v4 clips into your EZ-Robot Revolution chassis or custom robot. It is easily controlled over Wi-Fi using ARC software.
Note: Power supply or batteries sold separately
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
EZ-B v4 Smart Robot Controller
The EZ-B v4 is the next generation brain of your robot or IoT device, powering over 20,000 robots worldwide! Give your custom robot or IoT project features inspired from science fiction! With the electronics protected by a stylish plastic shell, the EZ-B v4 clips into your EZ-Robot Revolution chassis or custom robot. It is easily controlled over Wi-Fi using EZ-Builder software.
Note: Power supply or batteries sold separately
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
Alternate LiPo Battery Harness
LiPo to EZ-B v4 adapter for powering the EZ-Robot Developer Kit and Power Base. Connect any LiPo 7.4 battery to the EZ-B Power Base with this harness.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
LiPo Battery
Lithium-ion polymer robot battery provides power to your EZ-Robot or EZ-B v4.
*Note: LiPo Batteries will be shipped in a plastic casing that looks similar to the Dodecagon Body, in order to ensure that it arrives safely. Simply remove the battery door to extract your battery.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
LiPo Battery Charger
Recommended balancer charger for our LiPo Robot Battery 7.4v 1300mAh. This balancer charger monitors the voltage of each cell in a pack and varies the charge on a per-cell basis so that all cells are brought to the same voltage, so your batteries last longer.
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing
Alternate Power Adapter Connector
This adapter is used with the ez-bv4 power base to attach a battery pack. No soldering required!
We accept PO's from Educators
Note: Pricing is in USD. Contact us for Canadian pricing