Humanoid Head with Camera & RGB Eyes

$89.99 USD

Now $71.99 (Save 20%)

Add a humanoid head to your ezrobot so it can recognize its surroundings, and display emotions. The head includes a built in 640x480 resolution camera for vision tracking with ez-builder. The eyes include 18 RGB LEDs to display expressions in thousands of custom colors. Two metal gear micro servos allow the neck to move forward-and-back, and side-to-side. The bottom servo has an available Clip'n'Play connection, allowing you to connect the head to any other robot that uses ez-bits.

For ages 12+

Simply clip'n'play.

e z bits being manipulated and clipped together.

Customize your robot with ez-bits. All ezrobot Revolution parts include ez-bit connections. Simply slide the tab into the slot to establish a secure bond. The parts may be separated by sliding them apart. Multiple ez-bits can be connected together to make arms, legs, or anything else you dream up!

ezrobots are visual learners.

The camera features advanced vision learning, detection and tracking abilities. Your ezrobot can interact with objects, colors, faces, motion, glyphs, and QR codes!

Heavy duty digital servo motors.

A close-up view of the heavy duty servo motors used in e z robots.

Inside the HDD servo-motors are full metal gears and real ball bearings that lift 19 kg/cm! The metal gear and ball bearing internals will withstand a high load. These servos have enough strength to let your robots walk, move or lift.

Features

  • Operating speed: 0.22±0.01 sec/60° (7.4v)
  • Running current: 1400±30mA (7.4v)
  • Stall torque: 19±0.20kg·cm (7.4v)
  • Stall current: 3000±50mA (7.4v)
  • Running life: > 180,000 Turns
  • Temperature range: -10C to +50C
  • Operating voltage: 4.8V to 8.4v
  • Dual ball metal bearing
  • All metal gears
  • Connector wire length: 32cm
  • Futaba 3f (25 teeth) for driving spline/shaft
  • 6.2mm spline (including teeth)

The future is green.

Roli Revolution robot holding the earth in his claws.

You care about energy consumption with electronics. That's why ezrobot designed an innovative low energy digital switching power supply for our products. While most electronics dissipate heat to lower voltage, our products use an energy efficient power supply which generates practically no heat! Welcome to the future! :)

3D Printable Open Source Parts

A 3D printer.

The 3D printable CAD files of Revolution Robots and ez-bits are available in the CAD tab of each product, in the 3D Printing Section, or in the ez-builder software. 3D print your own robot parts or ask our community to 3D print the parts you choose. Create and share your own designs with other ezrobot users from around the world!

SKU: 1208