Your robot's fuse protects the EZ-B from being damaged. This gives you protection from short circuits, Allowing you to safely operate your robot. This will guide you through how to replace your fuse if it has been blown.
Note: You can get these fuses at your favorite local hardware store.
The fuse is located inside your robot. You will need to separate the chassis to access it. Observe the above illustrations to better understand how your robot is assembled.
Remove the four screws in the bottom of the chassis.
Separate the two halves of the chassis.
Locate the fuse.
Pull fuse away from its holder.
Replace with a new fuse
Reassemble your robot and now you are done!
You are now ready to use your robot! Advance to the next lesson - you are almost ready to be a EZ-Builder master!
Last updated 1/9/2015
This lesson applies to multiple robot products. Select your product below for related lessons.