General - Connections

How To Add This Control To Your Project

Step #1) Load the most recent release of EZ-Builder
Step #2) Press the Project tab from the top menu bar of EZ-Builder
Step #3) Press Add Control from the button ribbon bar of EZ-Builder
Step #4) Choose the General category tab
Step #5) Press the Connections icon to add the control to your project


Allows you to add additional EZ-B's to the project. The EZ-B's can be referenced in EZ-Script with the following syntax: Servo(2.d0, 20)
Which will move the servo connected to EZ-B #2 port D0 to position 20.

Other controls, such as the Auto Positioner or SoundBoard (EZB) will have an option to select the EZ-B board index.

Related Tutorials & Activities

USB WiFi or Ethernet Adapter

USB WiFi or Ethernet Adapter

As you may have seen in the WiFi Modes Tutorial, the EZ-B may be put into one of two available modes (AP or Client). Some cloud-based controls require an internet connection, such as PandoraBot, Mic...

Last Modified on 9/19/2018

Created by EZ-Robot

Setting Servo speeds and Initialization Script Tutorial

This tutorial will explain what an initialization script is and how to use them in your EZ-Builder projects. Initialization scripts, sometimes referred to as "Init" scripts are used to prime controls, devices, or existing scripts within your EZ-Builder projects, and sets them ready for use. Sometimes, you may see it referred to as a "Run Once" script. In the next few steps, I will go through how to set an "Init" script up, and go through some of the main uses for this function, that includes servos speeds and setting variables. [PDF]

Last Modified on 10/16/2015

Created by Steve G

How to choose correct battery(s).

Given the wide range of actuators and electronics which go into a robot, choosing the right battery may not be an easy task. This tutorial guides you through the thought processes involved in choosing one or more batteries for your robot. [PDF]

Last Modified on 10/15/2015

Created by Ravdeep

Related Articles: Connection