37 Sensors Lab 03

Author: pashley
Created: 12/5/2017
Updated: 1 week ago
Filesize: 1,295,923
This version of Six can be used as a place to experiment with sensors, LEDs, and motors, along with programming and imaginative add ons.
 
Load the robot project into EZ-Builder
Get
Purchase EZ-Bits for this robot
Buy
 

Step 1

Add Dodecagon Body


Step 2

Add Lever Servo - 90 Degrees as 3 OClock Base D23
  1. Connect Servo to Servo port D23


Step 3

Add Lever Servo - 90 Degrees as 9 OClock Inside
  1. Connect Servo to Servo port D12


Step 4

Add Lever Servo - 90 Degrees as 9 OClock Arm
  1. Connect Servo to Servo port D13


Step 5

Add Servo Gripper as 9 Oclock Left Claw
  1. Connect to Servo port D16


Step 6

Add Lever Servo - 90 Degrees as 12 OClock 1
  1. Connect Servo to Servo port D19


Step 7

Add Lever Servo - 90 Degrees as 12 OClock 2
  1. Connect to Servo port D18


Step 8

Add Hexapod Foot


Step 9

Add EZ-B v4 Camera as Camera
  1. Connect Camera to Camera port


Step 10

Add Ultrasonic Distance Sensor as Ultrasonic Distance Sensor
  1. Connect Trigger to Digital port D1
  2. Connect Echo to Digital port D0


Step 11

Add Extension Cube


Step 12

Add Lever Servo - 90 Degrees as 6 OClock Base D22
  1. Connect to Servo port D22


Step 13

Add Lever Servo - 90 Degrees
  1. Connect to Servo port D14


Step 14

Add Lever Servo - 90 Degrees
  1. Connect to Servo port D15


Step 15

Add EZ-B v4 WiFi Robot Controller


Step 16

Add Ultrasonic Distance Sensor as Sensor Holder
  1. Connect Trigger to Digital port
  2. Connect Echo to Digital port


Step 17

Add Extension Cube


Step 18

Add Extension Block


Step 19

Add Lever Servo - 90 Degrees
  1. Connect to Servo port