Aerius

Country
Canada
Posts
23 Forum Threads, 253 Posts
Contribution
answered 3 user questions, created 1 EZ-Robots, 11 achievements
Owner
Aerius
Last Updated
9/4/2014 11:56:37 AM
File Size
74,237 bytes
Text file containing words with coma separator. Ridle game-1 script extract each line from text file in to an array set-up to receive each word elements (in this example, not more tan 7 elements) Then depending of the answer, the script will navigate through the file to find the next logical word to submit to the player. Physical object: box full of cards with different image on each one. The game: let the robot guess what image is on the card. Player: my littel 4 years old daugter

Owner
Aerius
Last Updated
1/1/2015 1:20:18 PM
File Size
1,890,677 bytes
Script running Inmoov hand. Untill i attach it to the rest of the body, this script runs a dialog in bettween the pc and the EZB controling the hand. It's nothing fancy but it works

Owner
Aerius
Last Updated
7/30/2015 11:40:55 AM
File Size
145,590 bytes
This script is a simulation of Roli moving from room to room when asked for. To use this script you will need something red so the camera will react to it when asked for. You will also need to generate and print QR code: 1234, 2345, 3451, 4512, 5123 and 4 available glyphs What I envision, is roli moving to an open space, scan from a distance and move toward a red label. Similar to when your walking into a building and searching for a direction panel. When roli is near enough it will read and decode the information contain on the QR label. (So far my laptop camera is capable to decode a reduce QR 2" x 2" from 3'of distance) Each QR code contains proper direction to reach the room been asked to go to. EX: in QR code 1234, the first left digit of each code is use for the office 1 been go straight, 2 go right, 3 go left, 4 opposite direction 5 at the door step. You will find more explanation in QR-decoding script under script manager. When roli is at a door step it will walk in the room and ask or (discover by itself) for the proper glyph to confirm it is in the right room. So displaying red labels and QR code in strategic place in the house will allow Roli to find any room or (nest) (each QR have to be code dependig where it is posted in the house) Real world will tell if it is possible or not. So to start the script just use the phrase list under speech recognition and start with "Roli Initialise Navigation Routine" or go directly to Script Manager and Start "Initialise" script.

Owner
Aerius
Last Updated
7/29/2017 9:16:51 AM
File Size
37,224 bytes
Develop for Inmoov Robot. (Could also be used with any mobile) This script allows the eyes, head and torso to follow what you select the camera to track. If the tracking object is out of the camera field, every thing will then center in a neutral position. Could be adapted on a mobile where the camera scan for something and when found, the mobile allign itself with the camera still alligned with the target and then move to it.

Owner
Aerius
Last Updated
2/6/2016 8:16:36 AM
File Size
1,700,592 bytes
Inmoov Servo shoulder & Arm Buzz control You may watch the opperation just by connecting to your EZB. No need to connect any servo to it. The Buzz control script will actuate when you select an action into the right arm

Owner
Aerius
Last Updated
2/14/2016 11:56:11 AM
File Size
92,836 bytes
This script will automatically apply a release command after a servo has done his last movement If needed, it will be used to stop the buzzing noise when a servo is in standby holding position. 1- make sure there is no physical obstruction 2- define minimum and maximum movement value 3- Caution: use this script only if the mechanism assembly can hold position when the servo is released. The D23 Servo Buzz script will start when a connection is made to EZB For a demo, run the "Test multiple values" script and observe the servo control window turning to red when released. The servo will be released +/- 1sec after his last movement, no matter how long or at what speed it will do.

Owner
Aerius
Last Updated
7/15/2017 8:31:35 AM
File Size
592,378 bytes
Head Color tracking script will folow in this example red color. To avoid physical binding Before using the script the min and max position of all 3 servos controling the head have to be found. All these value are incorporate in the init script attach to the comm. control to connect the EZB to PC.

Owner
Aerius
Last Updated
10/20/2017 12:27:58 PM
File Size
30,172 bytes
This script will automatically apply a release command after a servo has done his last movement If needed, it will be used to stop the buzzing noise when a servo is in standby holding position. 1- make sure there is no physical obstruction 2- define minimum and maximum movement value 3- Caution: use this script only if the mechanism assembly can hold position when the servo is released. The D23 Servo Buzz script will start when a connection is made to EZB For a demo, run the "Test multiple values" script and observe the servo control window turning to red when released. The servo will be released +/- 1sec after his last movement, no matter how long or at what speed it will do.