Tutorials using the Read ADC Control

Welcome to the tutorials made by community members, just like you! With this User Tutorial section, create tutorials and share knowledge that you have learned about robotics. As you have witnessed, EZ-Robot has recognized the importance of robot education at home, classroom and workplace.

With a commitment to ensure education is shared, EZ-Robot encourages new inventions which advance our future and beyond!

All Tutorials

Filter by control:

 

Learn with The Robot Program

Learn how to build and program EZ-Robots with The Robot Program!

Flex Sensor with an ADC Port Tutorial

Here is a companion tutorial to go with the ADC tutorial. The ADC ports on the EZ-b v4 can host a number of different kinds of sensors that run on 3.3 volts. There are some sensors however that need a helping hand to work and the v4's analog ports, and flex sensors are one such sensor. In this tutorial, I will go through the steps for how to get a flex sensor up and running on an ADC port.

Last Modified on 10/16/2015

Created by Steve G


Using ADC (Analog to Digital) Ports, Commands and Controls.

This tutorial will cover some basics on using the ADC (Analog to Digital Converter) ports on the EZ-B v4. Included will be some information about the ADC ports, mention some of the peripherals that can be used with them, the EZ-Builder ADC controls you can use, and some script examples for you to look at and try.

Last Modified on 3/23/2016

Created by Steve G