Tutorials using the SoundBoard (EZB) Control

Welcome to the tutorials made by community members, just like you! With this User Tutorial section, create tutorials and share knowledge that you have learned about robotics. As you have witnessed, EZ-Robot has recognized the importance of robot education at home, classroom and workplace.

With a commitment to ensure education is shared, EZ-Robot encourages new inventions which advance our future and beyond!

All Tutorials

Filter by control:

 

Learn with The Robot Program

Learn how to build and program EZ-Robots with The Robot Program!

Break Out Sound Hack: Ez-b V4 External Sound Hack

Hey everyone! Following Dave Schulpius's tutorial for adding a 3.5mm headphone jack to the ez-b I successfully connected my wired speaker to the ez-b. Here's a vid detailing the hack and how I did. Original tutorial: Hope it helped! Tech [PDF]

Last Modified on 9/15/2015

Created by Cardboard Hacker


Breaking Out The Sound From The V4 Ezb

Hi all, EDIT: the below post has been changed to reflect changes to correct wrong information and show the successes I had with the proper wiring information I received from the fabulous EZ Robot Support team: I spent some time over the past couple days seeing what I could do with the sound that can be streamed from my computer and played through the EZB V4. First I gotta say I'm no sound engineer or even a weekend garage installer. Just... [PDF]

Last Modified on 9/15/2015

Created by Dave Schulpius


Soundboard PC & Soundbard EZ-B tutorial.

This tutorial will guide you through how to set up and use the "Soundboard" controls to give your robot the ability to have sound effects and play music without any additional hardware. This tutorial will explain the various soundboard controls, what they do, and will give a couple of examples that you can play with. [PDF]

Last Modified on 10/16/2015

Created by Steve G


The Robot Program Episode 003: Getting JD to Move

This lesson will demonstrate how to connect to and move the Revolution JD robot. Follow along with The Robot Program Episode 003: Getting JD to Move. At the end of this lesson, the reader will have learned how to connect to the robot using Wi-Fi, how to create and save a servo profile, and how to use the Auto Position and Soundboard controls to execute movements and routines. [PDF]

Last Modified on 4/19/2018

Created by Professor E


The Robot Program Episode 009: Getting Six to Move

This lesson will demonstrate how to connect to and move the Revolution Six robot. Follow along with The Robot Program Episode 009: Getting Six to Move. At the end of this lesson, the reader will have learned how to connect to the robot using Wi-Fi, how to move the robot, how to track the default color, and how to use the Auto Position and Soundboard controls to execute movements and routines. [PDF]

Last Modified on 5/14/2018

Created by Professor E


The Robot Program Episode 006: Introducing EZ-Builder

This lesson introduces the EZ-Builder Robot Software by exploring options and describing features. At the end of this lesson, the reader will be familiar with the overall layout and features of EZ-Builder. Follow along with The Robot Program Episode 006: Introducing EZ-Builder. [PDF]

Last Modified on 5/15/2018

Created by Professor E