Tutorials using the Roomba Movement Panel Control

Welcome to the tutorials made by community members, just like you! With this User Tutorial section, create tutorials and share knowledge that you have learned about robotics. As you have witnessed, EZ-Robot has recognized the importance of robot education at home, classroom and workplace.

With a commitment to ensure education is shared, EZ-Robot encourages new inventions which advance our future and beyond!

All Tutorials

Filter by control:

 

Learn with The Robot Program

Learn how to build and program EZ-Robots with The Robot Program!

Ez-b Powered By Roomba

Here is one way to eliminate the need for an additional battery to power the EZ-B. The Roomba SCI 7-pin mini din connector provides unregulated battery power at 1/2 amp directly to pins 6 & 7 (Gnd) and pins 1 & 2 (Positive battery) Normally on a fully charged Roomba battery the voltage can be as much as 17 vdc. Since the EZ-B (3) can accept up to 17 vdc direct Roomba battery power can be used to run...

Last Modified on 9/15/2015

Created by Robot Doc