Tutorials using the Horizontal Servo Control

Welcome to the tutorials made by community members, just like you! With this User Tutorial section, create tutorials and share knowledge that you have learned about robotics. As you have witnessed, EZ-Robot has recognized the importance of robot education at home, classroom and workplace.

With a commitment to ensure education is shared, EZ-Robot encourages new inventions which advance our future and beyond!

All Tutorials

Filter by control:

 

Learn with The Robot Program

Learn how to build and program EZ-Robots with The Robot Program!

Rotating Servo Calibration-unscripted

Hey guys. Made this tutorial for people who had difficulty understanding the Ez-Robot tutorials, All unscripted.(This will be my new vid tutorial name: Unscripted) Hope it helped someone! If it did, Like it! If you want more, Subscribe! Roll The Film! __________ Tech

Last Modified on 9/15/2015

Created by Cardboard Hacker


Setting Servo speeds and Initialization Script Tutorial

This tutorial will explain what an initialization script is and how to use them in your EZ-Builder projects. Initialization scripts, sometimes referred to as "Init" scripts are used to prime controls, devices, or existing scripts within your EZ-Builder projects, and sets them ready for use. Sometimes, you may see it referred to as a "Run Once" script. In the next few steps, I will go through how to set an "Init" script up, and go through some of the main uses for this function, that includes servos speeds and setting variables.

Last Modified on 10/16/2015

Created by Steve G


Sabertooth+Kagaroo+DC motors as Servos

This tutorial shows how to use a DC motor as a Servo, using a Sabertooth+Kangaroo boards combination and EZ-builder

Last Modified on 4/21/2016

Created by tevans