Tutorials by Professor E

Welcome to the tutorials made by community members, just like you! With this User Tutorial section, create tutorials and share knowledge that you have learned about robotics. As you have witnessed, EZ-Robot has recognized the importance of robot education at home, classroom and workplace.

With a commitment to ensure education is shared, EZ-Robot encourages new inventions which advance our future and beyond!

All Tutorials

Filter by control:

 

Learn with The Robot Program

Learn how to build and program EZ-Robots with The Robot Program!

The Robot Program Episode 023: Mobile JD

This lesson will demonstrate how to control the Revolution JD Humanoid with an iOS or Android phone or tablet. At the end of this lesson, readers will be familiar with how to access and connect to the mobile JD example project, how to execute basic controls, and how to access the available programming workspaces. Follow along with The Robot Program Episode 023: Mobile JD. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/55 [PDF]

Last Modified on 7/18/2018

Created by Professor E


The Robot Program Episode 005: Battery Charging and Care

This lesson provides an overview of how to charge EZ-Robot batteries and identifies where the battery cables are located on each robot body. The reader will learn how to properly charge and care for the robot battery. Follow along with The Robot Program Episode 005: Battery Charging and Care. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/26 [PDF]

Last Modified on 6/12/2018

Created by Professor E


The Robot Program Episode 001: Revolution JD Box Contents

This lesson will introduce the contents of the Revolution JD robot kit. Follow along with The Robot Program Episode 001: Revolution JD Box Contents. At the end of this lesson, readers will be able to identify the parts of the robot, the charging components, the Getting Started Guide, and where to find more information. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/53 [PDF]

Last Modified on 6/12/2018

Created by Professor E


The Robot Program Episode 022: Detect Face and Wave - EZ-Script

This lesson will demonstrate how to use EZ-Script to have the robot wave once it detects a face. At the end of this lesson, readers will be able to enable facial detection and code a basic script using EZ-Script. Follow along with The Robot Program Episode 022: Detect Face and Wave - EZ-Script. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/102 [PDF]

Last Modified on 6/12/2018

Created by Professor E


The Robot Program Episode 020: Detect Face and Wave - RoboScratch

This lesson will demonstrate how to use RoboScratch to have the robot wave once it detects a face. At the end of this lesson, readers will be able to enable facial detection and code a basic script using RoboScratch. Follow along with The Robot Program Episode 020: Detect Face and Wave - RoboScratch. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/94 [PDF]

Last Modified on 6/12/2018

Created by Professor E


The Robot Program Episode 021: Detect Face and Wave - Blockly

This lesson will demonstrate how to use Blockly to have the robot wave once it detects a face. At the end of this lesson, readers will be able to enable facial detection and code a basic script using Blockly. Follow along with The Robot Program Episode 021: Detect Face and Wave - Blockly. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/95 [PDF]

Last Modified on 6/12/2018

Created by Professor E


The Robot Program Episode 004: Identify JD Shoulder Servos

If the stickers that label JD's shoulder servos have fallen off, this lesson will show you how to figure out which is left and right for making the proper connections. The reader will learn a technique for determining the left and right shoulder servos. Follow along with The Robot Program Episode 004: Identify JD Shoulder Servos. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/84 [PDF]

Last Modified on 6/12/2018

Created by Professor E


The Robot Program Episode 003: Getting JD to Move

This lesson will demonstrate how to connect to and move the Revolution JD robot. Follow along with The Robot Program Episode 003: Getting JD to Move. At the end of this lesson, the reader will have learned how to connect to the robot using Wi-Fi, how to create and save a servo profile, and how to use the Auto Position and Soundboard controls to execute movements and routines. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/32 [PDF]

Last Modified on 6/12/2018

Created by Professor E


The Robot Program Episode 002: Building JD

This lesson will demonstrate how to build the Revolution JD robot. Follow along with The Robot Program Episode 002: Building JD. At the end of this lesson, the reader will have learned how to download the EZ-Builder software, where to access the step-by-step building instructions, how to Clip’n’Play the EZ-Bit robot components, and how to secure the connections to the EZ-B Robot Controller for fully building JD. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/61 [PDF]

Last Modified on 6/12/2018

Created by Professor E


The Robot Program Episode 006: Introducing EZ-Builder

This lesson introduces the EZ-Builder Robot Software by exploring options and describing features. At the end of this lesson, the reader will be familiar with the overall layout and features of EZ-Builder. Follow along with The Robot Program Episode 006: Introducing EZ-Builder. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/20 [PDF]

Last Modified on 6/1/2018

Created by Professor E


The Robot Program Episode 016: Changing JD's Battery

This lesson demonstrates how to replace JD's battery in case it has worn out and no longer holds a charge. The reader will learn how to properly change the battery, if instructed to do so by EZ-Robot customer support. Follow along with The Robot Program Episode 016: Changing JD's Battery. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/26 [PDF]

Last Modified on 5/29/2018

Created by Professor E


The Robot Program Episode 012: Getting AdventureBot to Move

This lesson will demonstrate how to connect to and move the Revolution AdventureBot robot. Follow along with The Robot Program Episode 012: Getting AdventureBot to Move. At the end of this lesson, the reader will have learned how to connect to the robot using Wi-Fi, how to track color, access the the RoboScratch workspace for programming, and how to execute wheeled movement. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/83 [PDF]

Last Modified on 5/29/2018

Created by Professor E


The Robot Program Episode 011: Building AdventureBot

This lesson will demonstrate how to build the Revolution AdventureBot robot. Follow along with The Robot Program Episode 011: Building AdventureBot. At the end of this lesson, the reader will have learned how to download the EZ-Builder software, where to access the step-by-step building instructions, how to Clip’n’Play the EZ-Bit robot components, and how to secure the connections to the EZ-B Robot Controller for fully building AdventureBot. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/82 [PDF]

Last Modified on 5/29/2018

Created by Professor E


The Robot Program Episode 010: AdventureBot Box Contents

This lesson will introduce the contents of the Revolution AdventureBot robot kit. Follow along with The Robot Program Episode 010: AdventureBot Box Contents. At the end of this lesson, readers will be able to identify the parts of the robot, the charging components, the Getting Started Guide, and where to find more information. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/81 [PDF]

Last Modified on 5/29/2018

Created by Professor E


The Robot Program Episode 009: Getting Six to Move

This lesson will demonstrate how to connect to and move the Revolution Six robot. Follow along with The Robot Program Episode 009: Getting Six to Move. At the end of this lesson, the reader will have learned how to connect to the robot using Wi-Fi, how to move the robot, how to track the default color, and how to use the Auto Position and Soundboard controls to execute movements and routines. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/35 [PDF]

Last Modified on 5/29/2018

Created by Professor E


The Robot Program Episode 008: Building Six

This lesson will demonstrate how to build the Revolution Six robot. Follow along with The Robot Program Episode 008: Building Six. At the end of this lesson, the reader will have learned how to download the EZ-Builder software, where to access the step-by-step building instructions, how to Clip’n’Play the EZ-Bit robot components, and how to secure the connections to the EZ-B Robot Controller for fully building Six. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/62 [PDF]

Last Modified on 5/29/2018

Created by Professor E


The Robot Program Episode 007: Six Box Contents

This lesson will introduce the contents of the Revolution Six robot kit. Follow along with The Robot Program Episode 007: Six Box Contents. At the end of this lesson, readers will be able to identify the parts of the robot, the charging components, the Getting Started Guide, and where to find more information. View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/50 [PDF]

Last Modified on 5/29/2018

Created by Professor E