Shell-E Innovation Kit

Building with Shell-E Innovation Kit

Introduction

Follow along with the example project assembly instructions to build a 3-D printed robot using the Shell-E Innovation Kit. When you load a project, the EZ-Builder software will download the required EZ-Bits and ask if you would like to view the assembly instructions. In this lesson, we will explain how to assemble a robot with the Shell-E Innovation Kit.

What You Will Need

  • 3-D printed Top Chassis, Bottom Chassis, and two Servo Clips
  • #0 Phillips screwdriver
  • Double-sided tape or hot glue
  • Six rechargeable AA batteries*
  • A Windows PC with EZ-Builder Installed
  • Shell-E Innovation Kit

*Note: Rechargeable AA batteries of at least 2000 mAh are recommended. Alkaline batteries will not last as long and may shorten the lifespan of the servos. Rechargeable batteries last longer in the classroom and are more environmentally responsible.

Let's Get Building!





Continue to Next lesson

Last updated 1/15/2019

Table of Contents




8. Blockly