Digital - Read Digital

How To Add This Control To Your Project

Step #1) Load the most recent release of EZ-Builder
Step #2) Press the Project tab from the top menu bar of EZ-Builder
Step #3) Press Add Control from the button ribbon bar of EZ-Builder
Step #4) Choose the Digital category tab
Step #5) Press the Read Digital icon to add the control to your project




Description

Display the status of the digital port. If anything greater than is connected to the digital port, ON will be displayed. If GND is connected to the digital port, OFF will be displayed.


Related Tutorials & Activities

How To Make A Wide Angle Ir Non Contact Bumper

I designed a wide angle IR (non contact) bumper for robots a while back but never used it. It may be useful to the folks here on the forum so I thought I would post it. The neat thing about this IR bumper is that it will detect most objects in front of it without any scanning like using a rotating servo plus ranger so no moving parts and its very fast. It also reports back the position of smaller objects...

Last Modified on 9/15/2015

Created by Toymaker


Related Articles: Set Digital