Third Party Robots - Sphero Movement Panel

How To Add This Control To Your Project

Step #1) Load the most recent release of EZ-Builder
Step #2) Press the Project tab from the top menu bar of EZ-Builder
Step #3) Press Add Control from the button ribbon bar of EZ-Builder
Step #4) Choose the Third Party Robots category tab
Step #5) Press the Sphero Movement Panel icon to add the control to your project


Description


Note: EZ-Robot is not a manufacturer of this third party hardware device. . Nor is ezrobot responsible for the operation of this third party device. For operational questions, it's best to consult the instruction manual for operational instructions.

The Sphero Movement Panel controls a Sphero over Bluetooth. Connect your computer to the Bluetooth signal of your Sphero. The computer will detect 2 COM ports for the Sphero, only one of them will connect to the sphero - we are unable to determine which COM port is the Sphero, so you have to guess. Sorry about that!

Every time you disconnect or reboot the Sphero, the Bluetooth connection must be deleted and re-synced. This is similar to the WiiMote behaviour.


Related Tutorials & Activities

Movement Panels

Movement Panels

One of the powerful features of EZ-Builder is the concept of Movement Panels. A Movement Panel is a control which is responsible for how your robot moves in directions (forward, left, right, stop, r...

Last Modified on 2/11/2017

Created by EZ-Robot


Related Articles: N/A