Roli

Created on 9/9/2014 7:27:28 PM
Last Modified at 6/23/2017 5:08:30 PM

Welcome to the Revolution Roli example project. There is a great tutorial course on our website at www.ez-robot.com with information on getting your Roli up and running.

Introduction

EZ-Robot Revolution Software Apps include assembly instructions for your robot. When you load a project, the EZ-Builder software will download the required EZ-Bits and ask if you would like to view the assembly instructions. In this lesson, we will explain how the assembly instructions work and teach you to become an expert robot builder! Click here to view the software tutorial.

*Note: When connecting servos to the EZ-B, pay attention to match the colors. Just like your home theater, the BLACK wire of the servo connects to the BLACK side of the EZ-B pins. Here is a video.


Servo Orientation

Keep a close eye on the EZ-Bit's physical features so you can identify the orientation. In this example, notice the direction of the servo with recognizable features of the real physical EZ-Bit in your hand. If you connect an EZ-Bit backward, your robot will behave funny and not work as expected - but might be worth the laugh!


Step 1

Add Rover Body
  1. Connect HBridge PWM Left (Green) to Digital port D0
  2. Connect HBridge Left A (Blue) to Digital port D1
  3. Connect HBridge Left B (Purple) to Digital port D2
  4. Connect HBridge Right A (Grey) to Digital port D3
  5. Connect HBridge Right B (White) to Digital port D4
  6. Connect HBridge PWM Right (Black) to Digital port D5


Step 2

Add Rotation Servo as Left Shoulder
  1. Connect to Servo port D15


Step 3

Add Lever Servo - 90 Degrees as Left Elbow
  1. Connect to Servo port D14


Step 4

Add Lever Servo - 90 Degrees as Left Wrist
  1. Connect to Servo port D13


Step 5

Add Servo Gripper as Left Claw
  1. Connect to Servo port D12


Step 6

Add Rotation Servo as Right Shoulder
  1. Connect to Servo port D19


Step 7

Add Lever Servo - 90 Degrees as Right Elbow
  1. Connect to Servo port D18


Step 8

Add Lever Servo - 90 Degrees as Right Wrist
  1. Connect to Servo port D17


Step 9

Add Servo Gripper as Right Claw
  1. Connect to Servo port D16


Step 10

Add Lever Servo - 90 Degrees as Neck Vertical
  1. Connect to Servo port D9


Step 11

Add Rotation Servo as Neck Horizontal
  1. Connect to Servo port D10


Step 12

Add EZ-B v4 Camera
  1. Connect Camera to Camera port


Step 13

Add Rover Can/Bottle Holder