Six
Created on
9/9/2014 7:25:39 PM
Last Modified at
6/23/2017 5:09:00 PM
This is the EZ-Robot Revolution Six example starter project.
There is a great tutorial course on our website at www.ez-robot.com with information on getting your Six up and running.
Introduction
EZ-Robot Revolution Software Apps include assembly instructions for your robot. When you load a project, the EZ-Builder software will download the required EZ-Bits and ask if you would like to view the assembly instructions. In this lesson, we will explain how the assembly instructions work and teach you to become an expert robot builder! Click here to view the software tutorial.
*Note: When connecting servos to the EZ-B, pay attention to match the colors. Just like your home theater, the BLACK wire of the servo connects to the BLACK side of the EZ-B pins. Here is a video.
Servo Orientation
Keep a close eye on the EZ-Bit's physical features so you can identify the orientation. In this example, notice the direction of the servo with recognizable features of the real physical EZ-Bit in your hand. If you connect an EZ-Bit backward, your robot will behave funny and not work as expected - but might be worth the laugh!
Step
1
Add Dodecagon Body
Step
2
Add Lever Servo - 90 Degrees as 1 OClock Inside
-
Connect Servo to Servo port D0
Step
3
Add Lever Servo - 90 Degrees as 1 OClock Outside
-
Connect Servo to Servo port D1
Step
4
Add Hexapod Foot
Step
5
Add Lever Servo - 90 Degrees as 11 OClock Inside
-
Connect Servo to Servo port D3
Step
6
Add Lever Servo - 90 Degrees as 11 OClock Outside
-
Connect Servo to Servo port D4
Step
7
Add Hexapod Foot
Step
8
Add Lever Servo - 90 Degrees as 9 OClock Inside
-
Connect Servo to Servo port D6
Step
9
Add Lever Servo - 90 Degrees as 9 OClock Outside
-
Connect Servo to Servo port D7
Step
10
Add Hexapod Foot
Step
11
Add Lever Servo - 90 Degrees as 7 OClock Inside
-
Connect Servo to Servo port D9
Step
12
Add Lever Servo - 90 Degrees as 7 OClock Outside
-
Connect Servo to Servo port D10
Step
13
Add Hexapod Foot
Step
14
Add Lever Servo - 90 Degrees as 5 OClock Inside
-
Connect Servo to Servo port D12
Step
15
Add Lever Servo - 90 Degrees as 5 OClock Outside
-
Connect Servo to Servo port D13
Step
16
Add Hexapod Foot
Step
17
Add Lever Servo - 90 Degrees as 3 OClock Inside
-
Connect Servo to Servo port D15
Step
18
Add Lever Servo - 90 Degrees as 3 OClock Outside
-
Connect Servo to Servo port D16
Step
19
Add Hexapod Foot
Step
20
Add Hexapod Dome
Step
21
Add EZ-B v4 Camera
-
Connect Camera to Camera port