LiPo Battery Balancer Charger

$29.99 USD

Recommended balancer charger for our LiPo Robot Battery 7.4v 1300mAh. This balancer charger monitors the voltage of each cell in a pack and varies the charge on a per-cell basis so that all cells are brought to the same voltage, so your batteries last longer.

For ages 12+

The basic process is to charge at constant current until each cell reaches 4.2V. The charger then switches to a constant voltage mode, and the charging current will gradually reduce while the charger holds the cell voltage at 4.2V. This will continue until the charge current has dropped to a small percentage of the initial charge rate, at which point the battery is considered fully charged. Some manufacturers specify 2%, others 3%, but other values are also possible. The difference in achieved capacity is minute.

This charger supports international with 120 or 240 volt. The included power cable is for USA/Canada.

Specifications

  • Input Voltage Range :11-16V DC
  • Built-in input reverse polarity protection
  • Input Current: 1000mAh
  • Output Current: 800mAh
  • Intelligent automatic voltage detection
  • Rechargeable Battery Type: 7.4V and 11.1V lithium battery
  • Size: 68 x 47 x 20
  • Weight: 200g
  • Red: Power indicator
  • Green Light: charging instructions (On when charging, Off when charged)
  • Green Flash and Off: Saturated Battery

SKU: 0042