Rover Can/Bottle Holder

Created By: EZ Robot on 5/23/2014

Add a can or bottle holder to the rover chassis

Extension Block

Created By: EZ Robot on 5/23/2014

Very useful extension that is the same length of a Clip 'n' Play Lever Servo. This allows you to extend an arm to get to hard to reach places. There are a total of 9 female connections and 1 male, which makes this extension very useful.

EZ-B v4 WiFi Robot Controller

Created By: EZ Robot on 5/23/2014

The EZ-B v4 boasts 200mhz of 32-bit Processors (ARM Cortex M3 & Microchip PIC32) , 5 Volt Tolerant I/O, Energy Efficient Digital Switching Power Supply, Wi-Fi Connectivity with security, Embedded Web Server, Amplified Digital Audio with Speaker, 3 i2c ports, 3 x UARTs, 24 Multi-use Servo/Digital/Serial ports, 73 Servos (Dynamixel & PWM), 8 Analog ports, and Integrated Video... All packed in a mini 2.1" x 2.2" size!

Extension Cube

Created By: EZ Robot on 5/23/2014

The extension cube allows multiple EZ-Bits to be connected to a single location. If you wish to connect more than one servo, this is your component! This bit hosts 3 female and 3 male EZ-Bit connections.

Female Clip'n'Play Adapter Plate

Created By: EZ Robot on 4/14/2016

Add this adapter plate to your custom robot to start using EZ-Bits with Clip'n'Play Technology. This adapter has holes for screws to mount to your custom robot shell, or even the wall of your home. Build a robot arm attached to your kitchen counter to pass you drinks!

iPhone 6 Plus Holder

Created By: EZ Robot on 4/12/2016

This is a holder for an iPhone 6 Plus or iPhone 6s Plus. There are two EZ-Clip connectors to attach servos for X/Y gimbal rotation. There is a clip on the back and a clip on the bottom.

iPhone 5 Holder

Created By: EZ Robot on 4/12/2016

This will hold an iPhone 5 or iPod Touch. There are two ez-clips to connect servos for gimbal x/y control. One clip on the back, and one clip at the bottom.

iPhone 6 Holder

Created By: EZ Robot on 4/12/2016

This will hold an iPhone 6 or iPhone 6s. There are two EZ-Clips to attach servos for X/Y Gimbal control. There is one clip on the back and one on the bottom.

Lego Female EZ-Clip

Created By: EZ Robot on 4/14/2016

This clip has a Lego attachment to connect Lego (tm) parts to your EZ-Robot. The EZ-Clip is a female.

Lego Male EZ-Clip

Created By: EZ Robot on 4/14/2016

This Lego adapters has a male EZ-Clip. Connect Lego parts to your EZ-Robot.

JD's Microphone

Created By: EZ Robot on 4/14/2016

The microphone used in the dancing JD videos where he sings "You Haunt Me" from the demo app. As seen in his famous YouTube Video.

Male ClipnPlay Adapter Plate

Created By: EZ Robot on 4/14/2016

Add this adapter plate to your custom robot to start using EZ-Bits with Clip'n'Play Technology. This adapter has holes for screws to mount to your custom robot shell, or even the wall of your home. Build a robot arm attached to your kitchen counter to pass you drinks!