Meet "dusty ", Modded Omnibot 4 Home Security Cam, Vacuum , Air Filter,sanitize

 
#1

Hello EZ Robot! Meet Dusty, he is a omnibot torso and I currently have the choice of robbie at head or a omnibot done where you can see inside. He will handle a few basic functions and us made more simple than his big brother Jarvis.

1. He can vacuum (which is loud) with power brush and impeller
2. He can "sweep" nearly silent by running the power brush at a reduced voltage and a small DC blower providing low level auction.
3.dusty will have two germicidal bulbs ,.one facing downward to the floor and another behind intake fans that not only cool electronics but it pulls air through a Honeywell two stage carbon filter.
4.dusty has 4 build in filters foam pre filter , and 3 carbon filters.
5. He will have a camera on pan tilt bracket. He will be controlled by Bluetooth or wifi.
6. Long runtime , 2 x 12v 7ah batteries.

Any other suggestions guys?

]
User-inserted image

#2

User-inserted image

#3

Very nice. Is there going to be enough room in that guy?

#4

@jstarne1 Man, I am still working through your Jarvis build... now I will never get anything done Smile

Go with the clear dome and interior lighting. Mount the camera on scaffolding like arrangement to allow view past and into the body.

#5

Lol thanks gunner , makes me feel like a million bucks!

Here are some pics of the robot so far. The dome is in the mail and i already made the pan tilt bracket for the ezrobot.camera. I must install the vacuum on dusty's back and find ways to mount the roomba side brushes i bought to get closer to furniture and corners. I already made new black rubber tires.
User-inserted image

User-inserted image

User-inserted image

#6

User-inserted image

#7

User-inserted image
Hard rubber tires replaced the old cracking and flat tires.

#8

User-inserted image

#9

@gunner , so you think i should do accent lighting inside the dome somehow?

#10

@jstarne1 inside the actual body, perhaps around the neck... like downward facing White LED's to highlight all the robo-guts when looking down through the dome. Somehow park the EZ-B in clear view, along with all the wiring and servos, etc. Ya know, ideas just to make you work as hard fixing up the inside as you do the outside Grin