Release 2017.01.05.00

 
#1

Changes:

- New firmware (not mandatory) for EZ-B v4.x/2 to allow direct wired serial connectivity to PCs. Baud rate is select-able in both EZ-Builder Connection Control Settings and EZ-B Web Administration Tools (advanced settings), which must match. The serial connection to the EZ-B uses the Camera Port.

Wiring Tutorial: http://www.ez-robot.com/Tutorials/Lesson/76?courseId=5

  Get EZ-Builder for Windows

#2

Thank you sooooooooo very much DJ!

#3

Ditto!

#4

Hmmmm... I thought @Alan would be way more excited.... Grin.... Definitely a useful addition to ez robot..... Smile

#5

Alan did use an exclamation mark, that's Archie comic excitement right there.

#6

Yes!

Finally i will enjoy my new EZB4 V2 without fearing the WIFI radiation....

i still have one problem.... I need to shutdown more than 20 neighbors wifis ...

#7

Thanks DJ!

#8

Quote:


Finally i will enjoy my new EZB4 V2 without fearing the WIFI radiation...



<evil grin>

Alan

#9

oh my lanta..... the day has finally come!
THANK YOU Grin

#10

awesomeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee!