I want to use JD in network mode.
Everything works in Ad Hoc.
Then I switch to the WIFI mode.
If I connect JD to the network,
This is also found via EZ-Builder.
I can control it but not use its camera.
Always get the error camera timeout.
Is there for the camera also a tool for the search of the ip?
Have everything tried including Google.


Type the IP address in the camera box. Or if you have a /2, use the SCAN tool button next to the address entry box.

User-inserted image


The scan tool give me the ip from JD.
I can connect JD.
But i cant connect with this IP the cam.
When I press the scan button next to the camera IP,
Opens a window "listening ....".
I have it at 2 PCs tried.

I can choose my webcams and a parrotcam but not JD.

In standart connection AP Mode, JD works fine.


If you have an EZ-B v4.x/2, the scan will work on the camera control. If you have a previous generation EZ-B v4, you manually type the address in the box using the keyboard.

*Note: the address that you type in the camera control and connection control will save with the robot project.

User-inserted image

If you have a previous generation EZ-B v4 and wish to upgrade to the latest, you can do so with the EZ-B v4/2 Comm Upgrade. The EZ-B v4/2 Comm Upgrade adds new features, including broadcast for EZ-B's and connected cameras. Otherwise, you can use the keyboard and type the IP address in the camera address window with previous generation EZ-B v4's.

The EZ-B is always in WiFi mode. The WiFi mode on this topic is CLIENT MODE. Find out more about the different WiFi modes in the tutorial here: https://www.ez-robot.com/Tutorials/Lesson/15?courseId=5


Thanks for your Service.
I have find the way.
You are great.


Glad to hear Smile