Assembly Instructions


Step 1 of the instructions cover connecting the H-Bridge to the digital ports, but make no mention of which pin of the three pins per port (Black, Red, White) to connect to nor do they mention the red/black pair connection.

The next lesson describes in detail how to make all these connections.

Shouldn't the "Connecting Roli's Motors (H-Bridge) lesson proceed the "Roli Assembly instructions" and step 1 also be removed from the later instructions?


The assembly instructions for the Roli robot can be found in the learn section. Here is a direct link:

The HBridge can be connected after the robot has been assembled. You can find the HBridge wiring instructions here: