#1

Dears,

I bought EZ- V4 for my Wall E upgrade. For Six Revolution I used remaining EZ-V3.

Hardware is ready . Now software. Please does exist any possibility how to reverse servo movement via Auto position panel ? I used 4 servos from ez-robot set, but they have reverse movement unlike the rest 8 servos. Can you help me ?



User-inserted image



User-inserted image

#2

Hi
Hope I can help, I used to live in the Czech Republic BTW

I am afraid not, it has to be done manually, I think previously it was an option to reverse servos but it was troublesome.

The movements are from 1 to 180, meaning 1 is the servo completely to one side and 180 to the other (sorry if I am giving info you already know), so you will have to write the positions manually, inverting the numbers

180 - (your non inverted position)

while it is quite simple, I know it feels a little bit strange, you might just have to get used to

#3

So thank you for your help. I think it is possible to change polarity of the servo motors how to solve quickly ?

#4

No you cant change the servo polarity.

#5

No, I talked about polarity of the motor of the servo not the servo.

#6

If you want to do that way...

You will need reverse the motor polarity and the potentiometer polarity (end terminals)

#7

I think you can use a servo reverser, they are very cheap, you can even make your own circuit, it is very easy, but servo reverser is a faster way

something like this:

http://www.hobbyking.com/hobbyking/store/__45690__Turnigy_8482_Servo_Signal_Reverser.html

this way they will move like the rest of the servos, however you will need a servo reverser for each servo