My 3 Finger Claw Design For Ez Robot Evolution Robots

 
#1

Took me a few tweaks but here is my pretty easy and simple design for a 3 finger claw... Oops I meant Revolution not Evolution....

Printed in ABS @200micron resolution
Printed on an enclosed Up! Plus 2 printer...
Print time for both was just over 2 hours hour
Print orientation on their side (vertical). Although it produces way more support material they just didn't print as well on their back... Your results may differ, however.
You may also need to do a little sanding



3_fingerGripper_part1.stl

3_fingerGripper_part2.stl

#2

Nicely done, stl files? Smile Smile

#3

I will probably after maybe a few more tweaks... I will send them via email to people who want them... I really don't want to put them on Thingiverse...

#4

Fair enough, it's working perfectly... congrats ! Winky

#5

Thanks.... So yes, I will make the stls available in a couple of days....

#6

Nicely done. I really need to get a 3D printer.....

You can post STL's here instead of thingverse if you don't want to worry about monitoring this thread or getting random email requests for years to come Smile

Alan

#7

Hey Alan... 3D printing will suck you in sooner than later I am sure.... Anyway, thanks... I made a few more changes and will do another test print. If it goes well I will post the stls...

Cheers

#8

That is so freaking cool!

#9

Awesome!

#10

Here are the STLs... It's working great... Feel free to alter or add to as you wish...

3_fingerGripper_part1.stl

3_fingerGripper_part2.stl

Cheers