#1

could there be a reason to set up the leg from six all clockwise.
i see a pic it was diff earlyer.


User-inserted image

#2

To assemble your six, there are 2 methods.

1) Use the EZ-Builder 3d automated instructions: http://www.ez-robot.com/Tutorials/Lesson/27?courseId=2

2) Use the web instructions in the Six tutorial under learn menu item: http://www.ez-robot.com/Tutorials/Lesson/62?courseId=2


Both options are presented in the Six Hexapod Course. The Six Hexapod course is presented to you when EZ-Builder is first launched, or accessed by the top of this website by clicking the learn menu option. Here is a direct link to the course for the Six Hexapod: http://www.ez-robot.com/Tutorials/Course/2

#3

dj thanks

#4

just checked bolt.bolt are clockwise.
if i change the right side counter clock wise,i set D1to 130 degree
D16 TO 130
D13 TO 130
in auto position window.is there anything els to look out for.

#5

If you modify the position of servos, there are a few places which will require updated positioning with Six Hexapod deafult project

1) All auto position frames

2) Camera servos for tracking

3) Mobile Interface for Servo Slide Trackbar

#6

seems better to leave it thisway like it is.