Congratulations Steve G, for answering the question and has received an EZ-Credit award! Share what you have learned and create a tutorial to help others by clicking here.

Connection Questions

Assistance Requested

Help Aabid with their question and receive $10 of EZ-Credit to get more robots and parts from our store. The following information was provided about their previous efforts searching tutorials for a resolution.

Aabid claims to have checked these sources:

I cannot seem to connect my ez-robot Revolution six to my iPhone. I am entering the IP address as and a message pops up saying connection error. Please advise.


I have found a few conversations, tutorials and activities that may help with your question. Take a look at these links. I've sorted them by what I believe to be most relevant but that is not always the case as I'm still learning.

Also, consider reviewing the Learn section for informative lessons and activities. Check it out!


can you connect to your pc and see the number you have .
also the batt off six and your iphone fully loaded.


Unfortunately I don't have a PC. I have a Mac computer and I don't think there is an app for Mac. Both the battery on my iPhone and robot is fully charged.


whits iphone do you have?


iPhone 6


did you see this tutorial

mobile six


Hi, we need an answer for every one of these questions in order to help you...

Relevant Mobile App Tutorials

1) Here’s the tutorial for the EZ-Robot Mobile:

2) Here’s specific instructions for connecting SIX to EZ-Robot Mobile:

3) Both can be found on the Activities tutorials:

Connecting Debug Procedure

To receive assistance, these questions must be answered.

1) is the battery on the robot fully charged?

2) does the ezrobot make a startup sound when powered on?

3) is there a light flashing on the ezb when powered on?

4) what color is the light on the ezb?

5) are you connecting the phone/device to the wifi network of the ezb?

6) Press the connect button.

a. If an error appears, some devices take up to 1 minute to detect the ezb - wait 5-10 seconds and press connect again.

b. *Note: do not change or modify the IP address field on connection screen. Use the default value.

7) if a connection still does not occur, does the ezb wifi name display as the connected wifi network on the connection screen?

8) have you double checked the wire connections to the ezb using the very helpful learn section on our website? Ensuring the black wire if all plugs matches the black side of the ezb connections? Etc...

a. Learn section can be accessed here:

9) reset the EZ-B and repeat this procedure

a. Resetting tutorial link:

b. When resetting, does EZ-B speak introduction message as in the video?

10) If still unable to connect, notify EZ-Robot with the answers to these questions. Also provide what device is being used to connect to the EZ-Robot? (model/operating system) eg Samsung Note 3/Android, iPhone 6


can you download ez builder on a mac?


@nomad you already know the answer is no... EZ Builder only runs on a PC.... You can however get a program(s) for Mac that will run virtual windows...



i dont know what a mac is?are these programs exspencive?