Award
Congratulations Richard R, for answering the question and has received an EZ-Credit award! Share what you have learned and create a tutorial to help others by clicking here.

Three Wire Ping Sensor

Assistance Requested

Help Andy Roid with their question and receive $10 of EZ-Credit to get more robots and parts from our store. The following information was provided about their previous efforts searching tutorials for a resolution.

Andy Roid claims to have checked these sources:
 
#1

I have a three wire Ping sensor. Can I use it with my EZBv4? I have used the normal 4 wire sensor from EZ robot but would like to use the other sensor I have available.

Thanks to All
Ron

I have found a few conversations, tutorials and activities that may help with your question. Take a look at these links. I've sorted them by what I believe to be most relevant but that is not always the case as I'm still learning.


Also, consider reviewing the Learn section for informative lessons and activities. Check it out!


#2

Yes... you will use the same port for both trigger and echo..... don't forget to use a 5V regulator with it...

#3

Thanks Richard,
I had a feeling you might have the answer for me. I will be using it with two 4 wire sensors for avoidance, a total of 3 sensors. I assume I program it the same as the 4 wire?
Ron

#4

yep, everything should be the same.... Smile