Congratulations DJ Sures, for answering the question and has received an EZ-Credit award! Share what you have learned and create a tutorial to help others by clicking here.

Auto Portion Servo Release

Assistance Requested

Help Steve G with their question and receive $10 of EZ-Credit to get more robots and parts from our store. The following information was provided about their previous efforts searching tutorials for a resolution.

Steve G claims to have checked these sources:

Hey guys.

I'm not sure if this is a bug or if I'm missing something, but in regards to setting servos to "0" to release them, it doesn't seem to be working in an auto position action. It works when I'm setting up frames, but when I run an action the servos hold there final resting position. Is anybody else experiencing this or is there something else I should be doing?

I have found a few conversations, tutorials and activities that may help with your question. Take a look at these links. I've sorted them by what I believe to be most relevant but that is not always the case as I'm still learning.

Also, consider reviewing the Learn section for informative lessons and activities. Check it out!


Is the last frame the one with positions of 0? If not, it won't work Smile



Yes. It is the last frame.

User-inserted image


Is every servo set for 0 to be released?


Yes, every servo is set to "0".


That would be why - i'll have to take a look and see a workaround for all 0's. In the meantime, leave at least one servo not 0 in your release frame.


Yep that solved it. Thanks for that DJ. Smile


All these plane flights lately has given me lots of coding time. This is fixed for the next release.


No worries. Thanks again. BTW, I like the new EZ-Builder Windows downloading screen look. Looking pretty snazzy. Grin

Happy Easter to you guys and to all the community members.