Why My Camera Always Disable

 
#1

I recently received EZ-B , a gift from EZ-Robot Community thanks for it.

when i try for first time, I have a problem with my ez-robot camera whenever I press start to view camera always disable camera message appears, but for control the servo is fine and working except the camera. If Using my laptop cam is working. i try to check the wire and Pin connection all is fine (im use Multy tester for check that) , the blue led camera is blinking when Ez-B is turn on but when i press start to view cam, camera disable message appears. i no have ide for this proble, can somebody help me. Thankyou


User-inserted image

#2

chouldn ezbv4 ip same as camera?

#3

yes is same, and i try all cam option on video device but still camera disabled

#4

User-inserted image

take a look as this pic.
also what batterie do you use?

#5

yes is same ip with EZb, and i try another cam option is still same, but if using webcam is working.
6x AA rechargeable battery 700mah, and i try use lipobattery 7,4v 1300mah

#6

yes i gess its the batterie to weak.

#7

but that work to servo movement multy servos, so i must using battery in 2000mah and up? lest i try it, thankyou nomad Smile

#8

If the led is flashing... Maybe the cable is damaged.

It would help to see the error. Press the copy button and paste it here.

#9

this is the correct batt.


batt

#10

@DJ Sures, oke Dj

at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at EZ_B.EZBv4Video.()
2/1/2015 9:37 AM - Camera Disabled
2/1/2015 9:37 AM - Camera Initialized: EZB://192.168.1.1 @ 320x240
2/1/2015 9:38 AM - EZ-B v4 Camera Error: System.IO.IOException: Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at EZ_B.EZBv4Video.()
2/1/2015 9:38 AM - Camera Disabled