Congratulations DJ Sures, for answering the question and has received an EZ-Credit award! Share what you have learned and create a tutorial to help others by clicking here.

Speech Recognition

Assistance Requested

Help rb550f with their question and receive $10 of EZ-Credit to get more robots and parts from our store. The following information was provided about their previous efforts searching tutorials for a resolution.

rb550f claims to have checked these sources:

I having a problem with microphone level setting under the setup microphone property from the speech configuration .Every time i open my project i noticed that the microphone level shows level 0 under microphone properties.What do i need to do so that microphone listen level stays were i set set the slider..Typically i have it at 80. Windows 7 pc.

I have found a few conversations, tutorials and activities that may help with your question. Take a look at these links. I've sorted them by what I believe to be most relevant but that is not always the case as I'm still learning.

Also, consider reviewing the Learn section for informative lessons and activities. Check it out!


That's a global volume setting. In your connection control "On Connection" script set the volume using the ez-script command SetVolume()


Thank you for your help. It is truly appreciated..Absolutely love EZB4.


That's excellent to hear Grin