Congratulations Rich, for answering the question and has received an EZ-Credit award! Share what you have learned and create a tutorial to help others by clicking here.

Audio Question

Assistance Requested

Help Jayutmb with their question and receive $10 of EZ-Credit to get more robots and parts from our store. The following information was provided about their previous efforts searching tutorials for a resolution.

Jayutmb claims to have checked these sources:

Dumb question... is there a way to funnel the audio out of the ezb 4 without having to take it apart..ect? I know I could do mp3 triggers..ect but I just want to send the audio that is already coming out of ezb to a bigger speaker/power (looking for a plug and play kinda solution)

I have found a few conversations, tutorials and activities that may help with your question. Take a look at these links. I've sorted them by what I believe to be most relevant but that is not always the case as I'm still learning.

Also, consider reviewing the Learn section for informative lessons and activities. Check it out!


No. You will need to open the case and solder on to the speaker connection pads or take the raw audio to a different amp and then speaker.


thx Smile