Bioloid Cases For Standard Servos

 
#1

I was messing around during lunch and came up with this. a case that lets you build bots like Darwin and Bioloids but with out the expense of the a-12's.


User-inserted image

User-inserted image

User-inserted image


ill put up the stl's as soon as i print one and test it out.

#2

ok it works. regular servos dressed up as bioloids. 3 pc case with all brackets adjusted to fit as seen in foot assembly video below.




bio-servo-01.STL


bio-servo-2.STL


bio-servo-3.STL

#3

Sweet. Super Cool. Thanks For Sharing These Tony Smile

#4

Bioloid on the cheap.

#5

anthony that real super


hi antron007

#6

brill any chance of the rest please Tongue

#7

Heres the first print.....Perfect!

Im going to customize all the bioloids parts to work with the revised servos.


User-inserted image

User-inserted image

User-inserted image

#8

standard res print. 80min per case. case are in 3 pc, you need to unscrew the 4 screws on the back of the servo and remove the rear cover for a snug fit in the case.