Mini Mod To The Ezb(4)

 
#1

For those EZB(4) users that have a vertical clearance challenge, there are a couple of things that can be done to shorten the amount of vertical space occupied by your new version 4 EZB.

First you can remove the outer shell and gain some additional space. Second you can remove the original Mini Deans power connector, then modify a new min-dean connector by bending the contacts 90 degrees and solder it into place. This effort will also provide you with just a little more vertical clearance for your project effort.


User-inserted image
This image shows the original Deans connector on your EZB(4)



User-inserted image
This image shows the original Deans connector removed and the new deans connector with the power pins bent into a 90 degree angle.



User-inserted image
This image shows the modified Deans connector installed into the EZB(4)

#2

I like it.

j

Smile Smile Smile Smile

#3

Oh, I like it :-)) I have not so much space in my robot. It's a nice idea, thanks :-)

#4

Cool idea! I like it!