Award
Congratulations Rich, for answering the question and has received an EZ-Credit award! Share what you have learned and create a tutorial to help others by clicking here.

Ezb Version Reports Invalid Version

Assistance Requested

Help rb550f with their question and receive $10 of EZ-Credit to get more robots and parts from our store. The following information was provided about their previous efforts searching tutorials for a resolution.

rb550f claims to have checked these sources:
 
#1

I get a message that i have wrong ezb version when trying to connect to my project for ezb3.;;Here is the debug message.....

7/14/2014 2:43 PM - Attempting connection on COM3
7/14/2014 2:43 PM - Connected to COM3 at 9600
7/14/2014 2:43 PM - EZ-B reports EZ-Robot OS v16
7/14/2014 2:43 PM - Welcome to EZ-B v3!
7/14/2014 2:43 PM - Connection Failed: System.Exception: Invalid EZ-Robot OS Version. Please Upgrade.
EZ-B Reports v16. This copy of EZ-Builder requires v16.6

Would you like to view the help tutorial with instructions on how to upgrade the EZ-Robot OS?
at EZ_B.EZB.Connect(String hostname, Int32 baudRate)
7/14/2014 2:43 PM - Disconnected

When i click on help it shows i have ezb 2014.06.22.00 firmware 16.6..Help..This occured after version update..

I have found a few conversations, tutorials and activities that may help with your question. Take a look at these links. I've sorted them by what I believe to be most relevant but that is not always the case as I'm still learning.


Also, consider reviewing the Learn section for informative lessons and activities. Check it out!


#2

Help doesn't show your current version of firmware it shows the version required for using that version of EZ-Builder.

You need to update your firmware.

Click Start
Click All Programs
Click EZ-Robot
Click EZ-B Firmware Update

This should start the firmware update tool.

Then follow the on screen instructions. I wrote a quick guide a while ago, the firmware version has since changed but the process is the same.

Here's my guide

Alternately you could click yes to the question asked about if you want help updating, it should take you to EZ-Robot's firmware update tutorial.


#3

I know it seems strange but, you need to update EZB3.... Go into the folder where your EZ Builder exe file is and you will see the EZB updater app... Run it, connect to your ezb and up date it to the current version

#4

Thank you so much for your fast response and support.You guys are the best.

#5

rb550f,
Those guys are on it fast.
On my pc 8.1 windows, Program files (86) on my hard drive, EZ Robot, EZ Robot Firmware Update.
My EZB3 shows 16.5
When I have not updated firmware for a while, it takes me a little while to find it.

#6

For future reference, windows 8 or 8.1 slide the home screen up to display all apps and the firmware update is under EZ-Robot or use the search everywhere box and type in "EZ-B" and both EZ-Builder and EZ-B Firmware Update should be at the top of the search results.