Congratulations Rich, for answering the question and has received an EZ-Credit award! Share what you have learned and create a tutorial to help others by clicking here.

What Type Of Servo Do I Need?

Assistance Requested

Help Aerius with their question and receive $10 of EZ-Credit to get more robots and parts from our store. The following information was provided about their previous efforts searching tutorials for a resolution.

Aerius claims to have checked these sources:

I want to complete my Rolly order before the end of the month

What type of servo and attachement do I need to install a front Ultrasonic sensor with scanning capability?

I have found a few conversations, tutorials and activities that may help with your question. Take a look at these links. I've sorted them by what I believe to be most relevant but that is not always the case as I'm still learning.

Also, consider reviewing the Learn section for informative lessons and activities. Check it out!


Hot glue gun and a micro servo Smile


if you opt to use the EZ-Bit shell and the clip n play bracket you can use a Standard Servo and it'll all look like it belongs.


Tanks guys for the advise


@ Riches answer , true story , I'm just so use to using some hot glue lol