Award
Congratulations Rich, for answering the question and has received an EZ-Credit award! Share what you have learned and create a tutorial to help others by clicking here.

Speech Synthesis Settings?

Assistance Requested

Help Doombot with their question and receive $10 of EZ-Credit to get more robots and parts from our store. The following information was provided about their previous efforts searching tutorials for a resolution.

Doombot claims to have checked these sources:
 
#1

I downloaded a Cepstral Voices app and although it shows up on EZ-Builder, I can't seem to use the effects package that comes with Cepstral. Is there any way I can use this on EZ-Builder? Anybody know?

I have found a few conversations, tutorials and activities that may help with your question. Take a look at these links. I've sorted them by what I believe to be most relevant but that is not always the case as I'm still learning.


Also, consider reviewing the Learn section for informative lessons and activities. Check it out!


#2

I don't have the Cepstral voices myself so can't check but I know this was mentioned previously and there is something that needs changing in the package to enable the effects.

Have a read of this topic, I haven't had chance to check it over but I'm 90% sure it's the one it was mentioned in.

If not then this one mentioned voices too.

#3

hi all
doombot i use the cepstral voice too.there is a program that comes whit cepstral calt swifftalker.
there you can make any lines you wanna say .my englich is not very good.but i will try to help.
here a little video



also you must use cepstral as you default voice on the pc

#4

Alright dudes! Thanks for your help...got steps from the old thread on how to make the sfx voice into default. Works perfectly. Grin

#5

yeach Smile

#6

@Doombot>
Glad it worked out for you. I really like the Cepstral voice Lawrence using the "old robot" voice effect.