Ez-b V4/2 Pcb Cad Layout

 
#1

Hello everyone,
I am looking for a cad file for the EZ-B v4/2 pcb.
I am specifically looking for the dimensions and mount hole locations. An stl file isn't useful.
I want to make up a bracket to fit the EZ-B v4/2 board into the head of my Inmoov "T-One"

#2

I just measured mine with calipers and knocked up a design in Autodesk 123D. The CAD files would make it easier but I had no issues just measuring the board...

#3

Yes, I was being lazy. I had seen that cad files were available on the EZ-B v4/2 product page but it was just stl files for the case.
I've made up dozens and dozens and dozens of files for the 3D printers I have designed and built but like I said, just being lazy.

Did you want to share your design Richard? I use fusion360 so it would convert easily from autodesk123.

#4

Use the learn section, select the product, and view the datasheet

Or

Select the 3D printing sub menu in the community section of this website. Look at the designer resources

#5

Thanks DJ. That works well. I knew I had seen it somewhere. Here is the link for anyone else.

http://www.ez-robot.com/Community/Revolution/CAD/EZ-B%20v4%20Dimensions.png