Ezb4 Version 2

 
#1

Hi to all!

Long Long time ago i had so much time for EZ-Robots and my Inmoov but then comes a dark time of no Robot work, but now i am back in business!


A BIG HELLO TO: DJ - BOB HOUSTON - DAVID COCHRAN - WBS00001 and STEVE G


DJ you bring out a Version 2 of the EZB Controller 4 and a Upgrade for the Version 1.

I check out the WLAN is better and there a 2 ARM Prozessors.

I have 7 old Controller Version - so it will be for me interessting if i only will upgrade and not must buy 7 controller new.

If i will do the upgrade to Version 2 - i will have the same version withe the same technical data if i will buy the new ones?


OR is something missing in the upgrade what will be in the NEW Version?


Other Question:

Is there possibility to connect the controller via a LAN Cable?



Boris



PS: It feels nice to be back!

#2

Welcome back!

No difference between upgrade kit and new systems, so might as well upgrade.

No ability to use a LAN cable, although you can now use USB cable (with a TTL adapter, and it uses the camera port).

Alan

#3

Hello also to you TECHGURU!


Thanx for your Info!


So it will be time for upgrade!


But with the USB Port it might be an idea - I think its USB 2.0?


Boris

#4

Welcome Back RentaPrinta!

#5

Nice to read you David!

#6

Quote:


But with the USB Port it might be an idea - I think its USB 2.0?



Technically, the EZ_B is a serial connection, although very high speed. Most TTL adapters are USB 2. Probably work on USB 1.

Alan

#7

Hi Techguru,


;-) i am more thinking about USB 3.0, but if you say the connection via TTL is fast enough, its ok.


Boris

I must check also this TTL Connection, but first the new WIFI