prototype[incomplete]

Author: adr2003
Created: 12/20/2017
Updated: 9 months ago
Filesize: 3,600,014
This is the EZ-Robot Revolution Six example starter project. There is a great tutorial course on our website at www.ez-robot.com with information on getting your Six up and running.
 
Load the robot project into EZ-Builder
Get
Purchase EZ-Bits for this robot
Buy
 

Step 1

Add Dodecagon Body


Step 2

Add Lever Servo - 90 Degrees as 1 OClock Inside
  1. Connect Servo to Servo port D0


Step 3

Add Lever Servo - 90 Degrees as 9 OClock Inside
  1. Connect Servo to Servo port D3


Step 4

Add Lever Servo - 90 Degrees as 9 OClock Outside
  1. Connect Servo to Servo port D7


Step 5

Add Lever Servo - 90 Degrees as 7 OClock Inside
  1. Connect Servo to Servo port D6


Step 6

Add Lever Servo - 90 Degrees as 7 OClock Outside
  1. Connect Servo to Servo port D10


Step 7

Add Lever Servo - 90 Degrees as 5 OClock Inside
  1. Connect Servo to Servo port D9


Step 8

Add Lever Servo - 90 Degrees as 5 OClock Outside
  1. Connect Servo to Servo port D13


Step 9

Add Lever Servo - 90 Degrees as 3 OClock Inside
  1. Connect Servo to Servo port D12


Step 10

Add Lever Servo - 90 Degrees as 3 OClock Outside
  1. Connect Servo to Servo port D1


Step 11

Add Lever Servo - 90 Degrees
  1. Connect to Servo port D4


Step 12

Add Lever Servo - 90 Degrees
  1. Connect to Servo port D20


Step 13

Add Lever Servo - 90 Degrees
  1. Connect to Servo port D21


Step 14

Add Lever Servo - 90 Degrees
  1. Connect to Servo port D22


Step 15

Add Lever Servo - 90 Degrees
  1. Connect to Servo port D23