Six 37 Sensors 01

Author: pashley
Created: 4/15/2017
Updated: 7 months ago
Filesize: 1,321,529
This version of Six can be used as a place to experiment with sensors, LEDs, and motors, along with imaginative add ons.
 
Load the robot project into EZ-Builder
Get
Purchase EZ-Bits for this robot
Buy
 

Step 1

Add Dodecagon Body


Step 2

Add Lever Servo - 90 Degrees as 3 OClock Inside
  1. Connect Servo to Servo port D12


Step 3

Add Lever Servo - 90 Degrees as 3 OClock Outside
  1. Connect Servo to Servo port D13


Step 4

Add Servo Gripper as 3 Oclock Right Claw
  1. Connect to Servo port D14


Step 5

Add Lever Servo - 90 Degrees as 9 OClock Inside
  1. Connect Servo to Servo port D23


Step 6

Add Lever Servo - 90 Degrees as 9 OClock Arm
  1. Connect Servo to Servo port D22


Step 7

Add Servo Gripper as 9 Oclock Left Claw
  1. Connect to Servo port D21


Step 8

Add Lever Servo - 90 Degrees as 12 OClock 1
  1. Connect Servo to Servo port D19


Step 9

Add Lever Servo - 90 Degrees as 12 OClock 2
  1. Connect to Servo port D18


Step 10

Add Hexapod Foot


Step 11

Add EZ-B v4 Camera
  1. Connect Camera to Camera port


Step 12

Add Ultrasonic Distance Sensor
  1. Connect Trigger to Digital port
  2. Connect Echo to Digital port


Step 13

Add Extension Cube