Six_ultrasonic_LED_cloud

Author: donesvarc
Created: 12/29/2016
Updated: 10 months ago
Filesize: 410,233
This project uses a distance sensor, extension cube and rotation servo to give Six the ability to avoid objects. Avoiding objects is done by using the Ultrasonic Radar Scan control. Configuring the control to increment a servo between a Min and Max position. The distance is received by the Radar Scan from the Ultrasonic sensor. If the distance is less than the specified distance, the Radar Scan control will initiate the REVERSE direction for the selected movement panel. In this case, the movement panel is an Auto Position.
 
Load the robot project into EZ-Builder
Get
Purchase EZ-Bits for this robot
Buy
 

Step 1

Add Dodecagon Body


Step 2

Add Lever Servo - 90 Degrees as 1 OClock Inside
  1. Connect Servo to Servo port D0


Step 3

Add Lever Servo - 90 Degrees as 1 OClock Outside
  1. Connect Servo to Servo port D1


Step 4

Add Hexapod Foot


Step 5

Add Lever Servo - 90 Degrees as 11 OClock Inside
  1. Connect Servo to Servo port D3


Step 6

Add Lever Servo - 90 Degrees as 11 OClock Outside
  1. Connect Servo to Servo port D4


Step 7

Add Hexapod Foot


Step 8

Add Lever Servo - 90 Degrees as 9 OClock Inside
  1. Connect Servo to Servo port D6


Step 9

Add Lever Servo - 90 Degrees as 9 OClock Outside
  1. Connect Servo to Servo port D7


Step 10

Add Hexapod Foot


Step 11

Add Lever Servo - 90 Degrees as 7 OClock Inside
  1. Connect Servo to Servo port D9


Step 12

Add Lever Servo - 90 Degrees as 7 OClock Outside
  1. Connect Servo to Servo port D10


Step 13

Add Hexapod Foot


Step 14

Add Lever Servo - 90 Degrees as 5 OClock Inside
  1. Connect Servo to Servo port D12


Step 15

Add Lever Servo - 90 Degrees as 5 OClock Outside
  1. Connect Servo to Servo port D13


Step 16

Add Hexapod Foot


Step 17

Add Lever Servo - 90 Degrees as 3 OClock Inside
  1. Connect Servo to Servo port D15


Step 18

Add Lever Servo - 90 Degrees as 3 OClock Outside
  1. Connect Servo to Servo port D16


Step 19

Add Hexapod Foot


Step 20

Add Hexapod Dome


Step 21

Add Rotation Servo as Sensor
  1. Connect to Servo port D19


Step 22

Add Extension Cube


Step 23

Add Ultrasonic Distance Sensor
  1. Connect Trigger to Digital port D20
  2. Connect Echo to Digital port D21


Step 24

Add EZ-B v4 Camera
  1. Connect Camera to Camera port NA