Six_ultrasonic_LED

Author: donesvarc
Created: 12/29/2016
Updated: 10 months ago
Filesize: 3,878,769
This is the EZ-Robot Revolution Six example starter project. There is a great tutorial course on our website at www.ez-robot.com with information on getting your Six up and running with LED and Sharp Infrared radar
 
Load the robot project into EZ-Builder
Get
Purchase EZ-Bits for this robot
Buy
 

Step 1

Add Dodecagon Body


Step 2

Add Lever Servo - 90 Degrees as 1 OClock Inside
  1. Connect Servo to Servo port D0


Step 3

Add Lever Servo - 90 Degrees as 1 OClock Outside
  1. Connect Servo to Servo port D1


Step 4

Add Hexapod Foot


Step 5

Add Lever Servo - 90 Degrees as 11 OClock Inside
  1. Connect Servo to Servo port D3


Step 6

Add Lever Servo - 90 Degrees as 11 OClock Outside
  1. Connect Servo to Servo port D4


Step 7

Add Hexapod Foot


Step 8

Add Lever Servo - 90 Degrees as 9 OClock Inside
  1. Connect Servo to Servo port D6


Step 9

Add Lever Servo - 90 Degrees as 9 OClock Outside
  1. Connect Servo to Servo port D7


Step 10

Add Hexapod Foot


Step 11

Add Lever Servo - 90 Degrees as 7 OClock Inside
  1. Connect Servo to Servo port D9


Step 12

Add Lever Servo - 90 Degrees as 7 OClock Outside
  1. Connect Servo to Servo port D10


Step 13

Add Hexapod Foot


Step 14

Add Lever Servo - 90 Degrees as 5 OClock Inside
  1. Connect Servo to Servo port D12


Step 15

Add Lever Servo - 90 Degrees as 5 OClock Outside
  1. Connect Servo to Servo port D13


Step 16

Add Hexapod Foot


Step 17

Add Lever Servo - 90 Degrees as 3 OClock Inside
  1. Connect Servo to Servo port D15


Step 18

Add Lever Servo - 90 Degrees as 3 OClock Outside
  1. Connect Servo to Servo port D16


Step 19

Add Hexapod Foot


Step 20

Add Hexapod Dome


Step 21

Add EZ-B v4 Camera
  1. Connect Camera to Camera port