Six Lab

Author: pashley
Created: 3/4/2016
Updated: 1 year ago
Filesize: 1,471,961
This version of Six can be used as a place to experiment with sensors, LEDs, and motors, along with imaginative add ons.
 
Load the robot project into EZ-Builder
Get
Purchase EZ-Bits for this robot
Buy
 

Step 1

Add Hexapod Body


Step 2

Add EZ-B v4 WiFi Robot Controller


Step 3

Add Lever Servo - 90 Degrees as 3 OClock Inside
  1. Connect Servo to Servo port D9


Step 4

Add Lever Servo - 90 Degrees as 3 OClock Outside
  1. Connect Servo to Servo port D10


Step 5

Add Servo Gripper as 3 Oclock Right Claw
  1. Connect to Servo port D11


Step 6

Add Lever Servo - 90 Degrees as 9 OClock Inside
  1. Connect Servo to Servo port D23


Step 7

Add Lever Servo - 90 Degrees as 9 OClock Outside
  1. Connect Servo to Servo port D22


Step 8

Add Servo Gripper as 9 Oclock Left Claw
  1. Connect to Servo port D21


Step 9

Add Lever Servo - 90 Degrees as 12 OClock Inside
  1. Connect Servo to Servo port D12


Step 10

Add Lever Servo - 90 Degrees as 12 OClock Outside
  1. Connect to Servo port D13


Step 11

Add EZ-B v4 Camera
  1. Connect Camera to Camera port NA


Step 12

Add Extension Block


Step 13

Add Hexapod Foot as Foot 8x8 Matrix Holder


Step 14

Add Extension Block as Breadboard Holder