GalapagosBot

Author: ezrobot
Created: 7/16/2015
Updated: 2 years ago
Filesize: 2,490,197
This is the EZ-Robot Galapagos Bot example starter project.
 
Load the robot project into EZ-Builder
Get
Purchase EZ-Bits for this robot
Buy
 

Step 1

Add Hexapod Body


Step 2

Add Lever Servo - 45 Degrees
  1. Connect Servo to Servo port D0


Step 3

Add Lever Servo - 180 Degrees
  1. Connect Servo to Servo port D1


Step 4

Add Extension Cube


Step 5

Add Clip'n'Play Adapter Plate


Step 6

Add Lever Servo - 135 Degrees
  1. Connect Servo to Servo port D3


Step 7

Add Lever Servo - 180 Degrees
  1. Connect Servo to Servo port D4


Step 8

Add Extension Cube


Step 9

Add Clip'n'Play Adapter Plate


Step 10

Add Lever Servo - 45 Degrees
  1. Connect Servo to Servo port D9


Step 11

Add Lever Servo - 0 Degrees
  1. Connect Servo to Servo port D10


Step 12

Add Extension Cube


Step 13

Add Clip'n'Play Adapter Plate


Step 14

Add Lever Servo - 135 Degrees
  1. Connect Servo to Servo port D12


Step 15

Add Lever Servo - 180 Degrees
  1. Connect Servo to Servo port D13


Step 16

Add Extension Cube


Step 17

Add Clip'n'Play Adapter Plate


Step 18

Add Extension Cube


Step 19

Add Extension Cube


Step 20

Add Extension Cube


Step 21

Add EZ-B v4 Camera
  1. Connect Camera to i2c port NA


Step 22

Add Extension Cube


Step 23

Add Hexapod Foot


Step 24

Add Hexapod Dome