Robotic Arm

Author: ezrobot
Created: 3/12/2015
Updated: 2 years ago
Filesize: 295,849
This robot was built by an ezrobot intern as a project to demonstrate how to help disabled. The speech recognition control has a few verbal commands programmed. If you have your speech recognition calibrated, you can speak the following phrases to have the robot feed you. - robot feed me - robot grab the spoon - robot stand - robot let the spoon go
 
Load the robot project into EZ-Builder
Get
Purchase EZ-Bits for this robot
Buy
 

Step 1

Add Hexapod Body as base


Step 2

Add EZ-B v4 WiFi Robot Controller


Step 3

Add Hexapod Dome as shell


Step 4

Add Rotation Servo as arm part 1
  1. Connect to Servo port D0


Step 5

Add Lever Servo - 180 Degrees as arm part 2
  1. Connect to Servo port D1


Step 6

Add Extension Block as arm part 3


Step 7

Add Lever Servo - 180 Degrees as arm part 4
  1. Connect to Servo port D2


Step 8

Add Lever Servo - 0 Degrees as arm part 5
  1. Connect to Servo port D3


Step 9

Add Extension Cube as arm part 6


Step 10

Add EZ-B v4 Camera as arm part 7
  1. Connect Camera to i2c port NA


Step 11

Add Rotation Servo as arm part 8
  1. Connect to Servo port


Step 12

Add Servo Gripper as arm part 9
  1. Connect to Servo port D4


Step 13

Add Extension Block as foot support


Step 14

Add Extension Block as foot support


Step 15

Add Extension Block as foot support


Step 16

Add Extension Block as foot support


Step 17

Add Extension Block as foot support


Step 18

Add Extension Block as foot support