Rider The Ball Kicker

Author: ezrobot
Created: 3/12/2015
Updated: 2 years ago
Filesize: 439,554
A very creative use of ez-bits to make an even more creative robot. This ball kicking robot uses a humanoid leg to kick a ball. The tail and humanoid leg provide balance while it moves around the floor.
 
Load the robot project into EZ-Builder
Get
Purchase EZ-Bits for this robot
Buy
 

Step 1

Add Humanoid Body
  1. Connect Left Shoulder to Servo port
  2. Connect Right Shoulder to Servo port


Step 2

Add Extension Cube as Bottom Center


Step 3

Add Extension Block as Bottom Left


Step 4

Add Extension Block as Bottom Right


Step 5

Add Continuous Rotation Servo as Right Wheel
  1. Connect to Servo port


Step 6

Add Continuous Rotation Servo as Left Wheel
  1. Connect to Servo port


Step 7

Add EZ-B v4 Camera
  1. Connect Camera to Camera port


Step 8

Add Lever Servo - 135 Degrees as Rear Tail Closer
  1. Connect to Servo port


Step 9

Add Lever Servo - 45 Degrees as Rear Tail Further
  1. Connect to Servo port


Step 10

Add Hexapod Foot


Step 11

Add Lever Servo - 135 Degrees as Front Kicker
  1. Connect to Servo port


Step 12

Add Humanoid Right Foot Assembly as The Foot
  1. Connect Ankle to Servo port
  2. Connect Knee to Servo port


Step 13

Add Lever Servo - 90 Degrees as Left Upper Arm
  1. Connect to Servo port


Step 14

Add Extension Block as Left Forearm


Step 15

Add Servo Gripper as Left Gripper
  1. Connect to Servo port


Step 16

Add Lever Servo - 90 Degrees as Right Upper Arm
  1. Connect to Servo port


Step 17

Add Extension Block as Right forearm


Step 18

Add Servo Gripper as Right Gripper
  1. Connect to Servo port