Robotic Arm

Author: VGosine
Created: 11/26/2014
Updated: 2 years ago
Filesize: 287,007
This is a Robotic Arm that was designed off of Revolution parts, entirely clip 'n play. It only grabs a spoon and feeds you so far but the posibilities are endless :)
 
Load the robot project into EZ-Builder
Get
Purchase EZ-Bits for this robot
Buy
 

Step 1

Add Hexapod Body


Step 2

Add Hexapod Dome


Step 3

Add Extension Block


Step 4

Add Extension Block


Step 5

Add Extension Cube


Step 6

Add EZ-B v4 WiFi Robot Controller


Step 7

Add EZ-B v4 Camera
  1. Connect Camera to i2c port NA


Step 8

Add Rotation Servo
  1. Connect to Servo port D0


Step 9

Add Lever Servo - 180 Degrees
  1. Connect to Servo port D1


Step 10

Add Lever Servo - 180 Degrees
  1. Connect to Servo port D2


Step 11

Add Lever Servo - 0 Degrees
  1. Connect to Servo port D3


Step 12

Add Servo Gripper
  1. Connect to Servo port D4


Step 13

Add Extension Block


Step 14

Add Extension Block


Step 15

Add Extension Block


Step 16

Add Extension Block


Step 17

Add Extension Block


Step 18

Add Extension Block


Step 19

Add Rotation Servo
  1. Connect to Servo port